Specificaties

Design:


Temperatuurbereik:
Tolerantie:
Materiaal:

- Steekdeel:

- Elastomeester:

Snelheid:

Optioneel:

2 steekdelen concentrisch bewerkt met gebogen klauwen. Boring tolerantie is H7+ spiebaan + stel schroeven DIN 916. Optioneel pilot bore (DV).
Verschilt per type elastomeerster
0.01 - 0.05 mm

≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.

Omschrijving

Het type EK1 klauwkoppeling van R+W Couplings heeft een economisch, robuust design en is eenvoudig te (de)monteren. De concentrisch bewerkte klemnaven geven de koppeling een zeer mooie rondloop. Het press fit design en gebruik van een spiebaan maakt deze precisie koppeling spelingsarm. De EK1 koppeling is te combineren met verschillende typen R+W elastomeersterren. Alle typen R+W elastomeersterren dempen de trillingen en zijn elektrisch isolerend, waarbij de ATEX versie juist geleidend is. Voor specifieke vragen over klauwkoppelingen neem dan contact op met VARIODRIVE.

Specificaties

Design:


Temperatuurbereik:
Tolerantie:
Materiaal:

- Steekdeel:⠀
- Elastomeester:⠀
Snelheid:⠀
Optioneel:

2 steekdelen concentrisch bewerkt met gebogen klauwen. Boring tolerantie is H7+ spiebaan + stel schroeven DIN 916. Optioneel pilot bore (DV).
Verschilt per type elastomeerster
0.01 - 0.05 mm

≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.

Specificaties

Design: 2 steekdelen concentrisch bewerkt met gebogen klauwen. Boring tolerantie is H7+ spiebaan + stel schroeven DIN 916. Optioneel pilot bore (DV).
Temperatuurbereik: Verschilt per type elastomeerster
Tolerantie: 0.01 - 0.05 mm
Materiaal:

- Steekdeel: ≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
- Elastomeester: precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Snelheid: Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Optioneel: Klant specifiek ontwerp, RVS en Atex.

Toepassingen

  • Machinebouw
  • Servo-drive technologie
  • Medische technologie
  • Renewable energy
  • Mijnbouw technologie
  • Pompen en compressoren
  • Transportsystemen
EK1 Serien2
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN2|2,4|0,5
Fit length (mm)C6,5
Inside diameter possible from Ø to Ø H7 (mm)
D1/23-9
Inside diameter (pilot bored) (mm)DV3
Inside diameter of elastomer (mm)DE6,2
Outside diameter (mm)B/B115
Moment of inertia per hub (10-3 kgm2)J1/J20,0001
Approximate weight (kg)0,008
Distance (mm)G3
Speed standard (min -1)15000
Speed balanced (10³min-1)60|67|45
Maximum torque (Nm)TKmax4|4,8|1
Overall length (mm)A20
Possible shortening length (mm)H4
2
CAD
EK1 Serien5
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN9|12|2
Fit length (mm)C12
Inside diameter possible from Ø to Ø H7 (mm)
D1/26-15
Inside diameter (pilot bored) (mm)DV4
Inside diameter of elastomer (mm)DE10,2
Outside diameter (mm)B/B125
Moment of inertia per hub (10-3 kgm2)J1/J20,001
Approximate weight (kg)0,03
Distance (mm)G5
Speed standard (min -1)15000
Speed balanced (10³min-1)57|65|43
Maximum torque (Nm)TKmax18|24|4
Overall length (mm)A34
Possible shortening length (mm)H6
5
CAD
EK1 Serien10
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN12,5|16|4
Fit length (mm)C12
Inside diameter possible from Ø to Ø H7 (mm)
D1/26-18
Inside diameter (pilot bored) (mm)DV6
Inside diameter of elastomer (mm)DE14,2
Outside diameter (mm)B/B132
Moment of inertia per hub (10-3 kgm2)J1/J20,003
Approximate weight (kg)0,08
Distance (mm)G6
Speed standard (min -1)13000
Speed balanced (10³min-1)53|63|40
Maximum torque (Nm)TKmax25|32|6
Overall length (mm)A35
Possible shortening length (mm)H6
10
CAD
EK1 Serien20
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN17|21|6
Fit length (mm)C25
Inside diameter possible from Ø to Ø H7 (mm)
D1/28-25
Inside diameter (pilot bored) (mm)DV7
Inside diameter of elastomer (mm)DE19,2
Outside diameter (mm)B/B142
Moment of inertia per hub (10-3 kgm2)J1/J20,02
Approximate weight (kg)0,15
Distance (mm)G9
Speed standard (min -1)12500
Speed balanced (10³min-1)45|50|35
Maximum torque (Nm)TKmax34|42|12
Overall length (mm)A66
Possible shortening length (mm)H19
20
CAD
EK1 Serien60
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN60|75|20
Fit length (mm)C30
Inside diameter possible from Ø to Ø H7 (mm)
D1/212-32
Inside diameter (pilot bored) (mm)DV9
Inside diameter of elastomer (mm)DE26,2
Outside diameter (mm)B/B156
Moment of inertia per hub (10-3 kgm2)J1/J20,06
Approximate weight (kg)0,35
Distance (mm)G11
Speed standard (min -1)11000
Speed balanced (10³min-1)31|31|25
Maximum torque (Nm)TKmax120|150|35
Overall length (mm)A78
Possible shortening length (mm)H22
60
CAD
EK1 Serien150
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN160|200|42
Fit length (mm)C35
Inside diameter possible from Ø to Ø H7 (mm)
D1/219-38
Inside diameter (pilot bored) (mm)DV14
Inside diameter of elastomer (mm)DE29,2
Outside diameter (mm)B/B166,5
Moment of inertia per hub (10-3 kgm2)J1/J20,1
Approximate weight (kg)0,6
Distance (mm)G12
Speed standard (min -1)10000
Speed balanced (10³min-1)22|26|18
Maximum torque (Nm)TKmax320|400|85
Overall length (mm)A90
Possible shortening length (mm)H26
150
CAD
EK1 Serien300
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN325|405|84
Fit length (mm)C45
Inside diameter possible from Ø to Ø H7 (mm)
D1/220-45
Inside diameter (pilot bored) (mm)DV16
Inside diameter of elastomer (mm)DE36,2
Outside diameter (mm)B/B182
Moment of inertia per hub (10-3 kgm2)J1/J20,4
Approximate weight (kg)1,1
Distance (mm)G15
Speed standard (min -1)9000
Speed balanced (10³min-1)22|26|16
Maximum torque (Nm)TKmax650|810|170
Overall length (mm)A114
Possible shortening length (mm)H32
300
CAD
EK1 Serien450
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN530|660|95
Fit length (mm)C50
Inside diameter possible from Ø to Ø H7 (mm)
D1/228-60
Inside diameter (pilot bored) (mm)DV22
Inside diameter of elastomer (mm)DE46,2
Outside diameter (mm)B/B1102
Moment of inertia per hub (10-3 kgm2)J1/J21,1
Approximate weight (kg)1,7
Distance (mm)G17
Speed standard (min -1)8000
Speed balanced (10³min-1)16|17|12
Maximum torque (Nm)TKmax1060|1350|190
Overall length (mm)A126
Possible shortening length (mm)H37
450
CAD
EK1 Serien800
Type (Elastomer insert)A|B|C
Rated torque (Nm)TKN950|1100|240
Fit length (mm)C65
Inside diameter possible from Ø to Ø H7 (mm)
D1/232-80
Inside diameter (pilot bored) (mm)DV29
Inside diameter of elastomer (mm)DE60,5
Outside diameter (mm)B/B1136,5
Moment of inertia per hub (10-3 kgm2)J1/J212
Approximate weight (kg)11
Distance (mm)G30
Speed standard (min -1)4000
Speed balanced (10³min-1)13|13|8
Maximum torque (Nm)TKmax1900|2150|400
Overall length (mm)A162
Possible shortening length (mm)H43
800
CAD
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal
EK1 Series
Type (Elastomer insert)
Rated torque (Nm)TKN
Fit length (mm)C
Inside diameter possible from Ø to Ø H7 (mm)
D1/2
Inside diameter (pilot bored) (mm)DV
Inside diameter of elastomer (mm)DE
Outside diameter (mm)B/B1
Moment of inertia per hub (10-3 kgm2)J1/J2
Approximate weight (kg)
Distance (mm)G
Speed standard (min -1)
Speed balanced (10³min-1)
Maximum torque (Nm)TKmax
Overall length (mm)A
Possible shortening length (mm)H
CAD Portal

Bekijk video

gerelateerde producten

Contact

Wil je met ons in contact komen?

Vul hiernaast het contactformulier in of ga naar de contactpagina

Contact ons

Contact ons