SK5
Veiligheidskoppelingen
Specificaties
Design:
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
- Balgdeel:
- Veiligheidsdeel:
- Naaf:
Optioneel:
2 klemnaven inclusief radiaal schroef, balgdeel en taps press fit segment
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 100 °C
Geen service
0.01 - 0.05 mm
Zeer flexibel hoogwaardig roestvrij staal
Hoogwaardig gehard staal
≤ 80 serie aluminium en ≥ 150 serie staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De SK5 veiligheidskoppeling van R+W Couplings voor direct drive toepassingen is uitgevoerd met klemnaven en taps press fit segment. Daarnaast heeft deze onderhoudsvrije precisie koppeling een snelle en accurate ontkoppeldetectie en ontkoppeling. Door de frictie klemverbinding is deze koppeling absoluut spelingsvrij. Het design zorgt ervoor dat deze veiligheidskoppeling eenvoudig te (de)monteren is en zowel elektrisch als thermisch isoleert. Het maximaal koppel is bij de SK5 koppeling tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Dankzij de geforceerde balgvorm kan het element tegelijkertijd zowel laterale, axiale als angulaire uitlijnfouten opvangen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
- Balgdeel:
- Veiligheidsdeel:
- Naaf:
Optioneel:
2 klemnaven inclusief radiaal schroef, balgdeel en taps press fit segmnt.
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 100 °C
Geen service
0.01 - 0.05 mm
⠀
Zeer flexibel hoogwaardig roestvrij staal
Hoogwaardig gehard staal
≤ 80 serie aluminium en ≥ 150 serie staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: 2 klemnaven inclusief radiaal schroef, balgdeel en taps press fit segment
Systemen: Single position (standard), multi position, load holding, full disengagement
Reactietijd ontkoppelen: 1 – 3 msec
Temperatuurbereik: -30 tot 100 °C
Service-life: Geen service
Tolerantie: 0.01 - 0.05 mm
Materiaal:
- Balgdeel: Zeer flexibel hoogwaardig roestvrij staal
- Veiligheidsdeel: Hoogwaardig gehard staal
- Naaf: ≤ 80 serie aluminium en ≥ 150 serie staal
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
| SK5 Series | |
| Overall length +0.5 (mm) | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
| Clamping fit length C1/C2 (mm) | C1/C2 |
| Inside diameter range H7 (mm) | D1 |
| Inside diameter range H7 (mm) | D2 |
| Outside diameter (mm) | E |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Lateral ± (mm) | max. |
| Angular ± (degree) | max. |
| Screw ISO 4762 | I |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance between centerlines (mm) | H |
| Distance (mm) | G |
| Distance, ("F" Version) (mm) | FF |
| Axial recovery force at max. preload compression (N) | K |
| Pretensioning, approx (mm) | K |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Diameter | D3 |
| Actuation distance (mm) | |
| Lateral spring stiffness | |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
