EZV
Tussenassen
Specificaties
Design:
⠀
⠀
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:
- Elastomeerster:
⠀
- Asdeel:
Snelheid:
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen. Tussenas uit aluminium met telescopisch instelbare lengte via klemverbinding
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
Koppeling is vervaardigd uit hoogwaardig aluminium
Precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Hoogwaardig aluminium
Afhankelijk van applicatie
Klant specifiek ontwerp, RVS en Atex
Omschrijving
De EZV tussenassen van R+W Couplings kan met zijn lange design grote afstanden standaard tot 4 meter overbruggen. Het unieke design laat de gebruiker toe tijdens montage de lengte nog naar wens aan te passen. De askoppeling is door de gedeelde klemnaaf constructie gemakkelijk te (de)monteren. De concentrisch bewerkte klemnaven geven de askoppeling een zeer mooie rondloop. Door het press fit design is deze precisie koppeling spelingsvrij. De EZV askoppeling is te combineren met twee verschillende typen R+W elastomeersterren, welteverstaan A en B. Beide typen R+W elastomeersterren dempen de trillingen en zijn elektrisch isolerend. Voor specifieke vragen over tussenassen of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:
- Elastomeerster:
- Asdeel:
Snelheid:
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen. Tussenas uit aluminium met telescopisch instelbare lengte via klemverbinding.
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
Koppeling is vervaardigd uit hoogwaardig aluminium
Precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Hoogwaardig aluminium
Afhankelijk van applicatie
Klant specifiek ontwerp, RVS en Atex
Specificaties
Design: 2 steekdelen concentrisch bewerkt met gebogen klauwen. Tussenas uit aluminium met telescopisch instelbare lengte via klemverbinding.
Temperatuurbereik: Verschilt per type elastomeerster
Tolerantie: 0.01 - 0.05 mm
Materiaal:
- Steekdeel: Koppeling is vervaardigd uit hoogwaardig aluminium
- Elastomeerster: Precisie gietwerk, slijtvast, en thermisch stabiel polymeer
- Asdeel: Hoogwaardig aluminium
Snelheid: Afhankelijk van applicatie
Optioneel: Klant specifiek ontwerp, RVS en Atex
Toepassingen
- Material handeling
- Print technologie
- Verpakkingsmachines
- Theater automatisering
- Gantry systemen
- Schroef spindel systemen
Tabel
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
| EZV Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Outside diameter center hub (mm) | B3 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Fastening screw (ISO 4762) | E1 |
| Fastening screw (ISO 4762) | E2 |
| Tightening torque of the fastening screw (Nm) | E1 |
| Tightening torque of the fastening screw (Nm) | E2 |
| Distance between centerlines (mm) | F1 |
| Distance between centerlines (mm) | F2 |
| Distance (mm) | G |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Shaft average value (mm) | N |
| Inserted min. length from - to (mm) | Amin |
| Extended over all length from - to (mm) | Amax |
| Measurement (mm) | X1+X2 |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
