SKN
Veiligheidskoppelingen
Specificaties
Design:
⠀
Systemen:
⠀
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
- Veiligheidsdeel:
- Klemnaaf:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel
Single position (standard), multi position, load holding, full disengagement
-30 tot 120 °C
Geen service
0.01 - 0.05 mm
⠀
Hoogwaardig gehard staal
≤ serie 500 aluminium en ≥ serie 800 staal.
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De SKN veiligheidskoppeling van R+W Couplings wordt ingezet bij indirect drive toepassingen. De SKN koppeling is compact, onderhoudsvrij en heeft een eenvoudig design. Door de frictie klemverbinding is deze precisie koppeling absoluut spelingsvrij. De integraal lager maakt het eenvoudig om een tandriempoelie of tandwiel te monteren. Het maximaal koppel is bij de SKN veiligheidskoppeling tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
⠀
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
- Veiligheidsdeel:
- Klemnaaf:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel
Single position (standard), multi position, load holding, full disengagement
-30 tot 120 °C
Geen service
0.01 - 0.05 mm
⠀
Hoogwaardig gehard staal
≤ serie 500 aluminium en ≥ serie 800 staal.
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel
Systemen: Single position (standard), multi position, load holding, full disengagement
Temperatuurbereik: -30 tot 120 °C
Service-life: Geen service
Tolerantie: 0.01 - 0.05 mm
Materiaal:
- Veiligheidsdeel: Hoogwaardig gehard staal
- Klemnaaf: ≤ serie 500 aluminium en ≥ serie 800 staal.
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
| SKN Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O1 |
| Diameter (mm) | O1 |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| Clamping length (mm) | C |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
