STN
heavy duty veiligheidskoppelingen
Specificaties
Design:
- Drijvende zijde:
- Gedreven zijde:
⠀
- De veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
Optioneel:
⠀
Conische klemnaaf
Montageflens met 12 stuks schroefdraad en integraal lagers
Gelijkmatig verdeeld
-30° C - 120° C
0.01 - 0.025 mm
Geen service
Versterkt nitro-gecarboneerd staal
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Omschrijving
De STN heavy duty veiligheidskoppeling van R+W Couplings heeft een hoge klemkracht voor vaste montage en wordt toegepast voor zowel directe als indirecte aandrijving. De STN veiligheidskoppeling heeft een zeer robuust, compact en eenvoudig design, en een zeer nauwkeurige beveiliging op overbelasting. Deze industrie koppeling is torsiestijf en heeft integraal een heavy duty lager voor ondersteuning. Deze veiligheidskoppeling wordt toegepast overal waar overbelasting van koppel voorkomt. Het maximaal koppel is bij de industrie koppeling is tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Neem voor specifieke vragen over veiligheidskoppelingen of andere industrie koppelingen contact op met VARIODRIVE.
Specificaties
Design:
- Drijvende zijde:
- Gedreven zijde:
- De veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
Optioneel:
⠀
Conische klemnaaf
Montageflens met 12 stuks schroefdraad en integraal lagers
Gelijkmatig verdeeld
-30° C - 120° C
0.01 - 0.025 mm
Geen service
Versterkt nitro-gecarboneerd staal
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Specificaties
Design:
- Drijvende zijde: Conische klemnaaf
- Gedreven zijde: Montageflens met 12 stuks schroefdraad en integraal lagers
- De veiligheidselementen: Gelijkmatig verdeeld
Temperatuurbereik: -30° C - 120° C
Tolerantie: 0.01 - 0.025 mm
Service-life: Geen service
Materiaal: Versterkt nitro-gecarboneerd staal
Optioneel: Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Toepassingen
- Hout verwerkingsmachines
- Bulk material handeling systems
- Tunnel boorsystemen
- Industriële Shredders
- Test bank
- Extruder
- Compressoren
- Afvalwaterzuivering
Tabel
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| STN Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1 |
| Inside diameter range F7 (mm) | D1 |
| Bore diameter max. Ø F7 with keyway (mm) | D1 |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Fastening screw (ISO 4017) | K |
| Tightening torque of the fastening screw (Nm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Flange outside diameter (mm) | B |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Effective clamping length (mm) | C2 |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
Bekijk video
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
