LPH
heavy duty lamellenkoppelingen
Specificaties
Design:
⠀
Speling:
Onderhoud:
Materiaal:
- Lamellen:
- Naven en as:
Optioneel:
Gedeelde klemnaaf zijn precisie bewerkt en gemonteerd op de lamellen met zeer sterke schroeven en bussen
Spelingvrij
Onderhoudsvrij
⠀
Hoog elastisch veerstaal
Hoogwaardig staal
Klant specifiek ontwerp en ATEX
Omschrijving
De LPH heavy duty lamellenkoppeling van R+W Couplings heeft een single flex design en is spelingvrij voor omkeerbare belasting. De gedeelde klemnaaf biedt de koppeling een hoge klemkracht. Het design heeft een hoge torsiestijfheid en maakt deze lamellenkoppeling zeer geschikt voor hoge snelheid, omgekeerde en intermitterende belasting. Deze industrie lamellenkoppeling wordt toegepast voor oneindlige levensduur bij extreme omstandigheden. Neem voor specifieke vragen over lamellenkoppelingen of andere industrie koppelingen contact op met VARIODRIVE.
Specificaties
Design:
⠀
Speling:
Onderhoud:
Materiaal:
- Lamellen:
- Naven en as:
Optioneel:
Gedeelde klemnaaf zijn precisie bewerkt en gemonteerd op de lamellen met zeer sterke schroeven en bussen
Spelingvrij
Onderhoudsvrij
⠀
Hoog elastisch veerstaal
Hoogwaardig staal
Klant specifiek ontwerp en ATEX
Specificaties
Design: Gedeelde klemnaaf zijn precisie bewerkt en gemonteerd op de lamellen met zeer sterke schroeven en bussen
Speling: Spelingvrij
Onderhoud: Onderhoudsvrij
Materiaal:
- Lamellen: Hoog elastisch veerstaal
- Naven en as: Hoogwaardig staal
Optioneel: Klant specifiek ontwerp en ATEX
Toepassingen
- Papiermachines
- Staalwals installaties
- Test stands
- Generatoren
- Bulk handling
- Centrifuges
- Aandrijving voor koeltorens
- Compressoren
- Printmachines
Datasheets
Manuals
Tabel
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LPH Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Assembly screw (ISO 4762) Nut (DIN 934) | H |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm | F |
| Distance (mm) | G |
| Fastening screw (ISO 4017) | H |
| Tightening torque of the fastening screw (Nm) | H |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
