LP2
heavy duty lamellenkoppelingen
Specificaties
Design:
Speling:
Onderhoud:
Materiaal:
- Lamellen:
- Naven en as:
Optioneel:
Precisie bewerkte naaf met spiebaan en gemonteerd met zeer sterke schroeven en bussen
Zeer geringe speling
Onderhoudsvrij
Hoog elastisch veerstaal
Hoogwaardig staal
Klant specifiek ontwerp en ATEX
Omschrijving
De LP2 heavy duty lamellenkoppeling van R+W Couplings is een double flex design om langere afstanden te overbruggen. Door frictie tussen de lamellen brengt deze industrie koppeling het koppel over. Hierdoor worden spanning, speling en verschuiving voorkomen, en verloopt het koppel via de boutverbinding. Hierdoor is de lamellenkoppeling meer torsie stijf, heeft deze een oneindige levensduur en is onderhoudsvrij. Het element kan zowel laterale, axiale als angulaire uitlijnfouten opvangen. Deze industrie lamellenkoppeling wordt toegepast voor oneindlige levensduur bij extreme omstandigheden. Neem voor specifieke vragen over lamellenkoppelingen of andere industrie koppelingen contact op met VARIODRIVE.
Specificaties
Design:
⠀
Speling:
Onderhoud:
Materiaal:
- Lamellen:
- Naven en as:
Optioneel:
Precisie bewerkte naaf met spiebaan en gemonteerd met zeer sterke schroeven en bussen
Zeer geringe speling
Onderhoudsvrij
⠀
Hoog elastisch veerstaal
Hoogwaardig staal
Klant specifiek ontwerp en ATEX
Specificaties
Design: Precisie bewerkte naaf met spiebaan en gemonteerd met zeer sterke schroeven en bussen
Speling: Zeer geringe speling
Onderhoud: Onderhoudsvrij
Materiaal:
- Lamellen: Hoog elastisch veerstaal
- Naven en as: Hoogwaardig staal
Optioneel: Klant specifiek ontwerp en ATEX
Toepassingen
- Papiermachines
- Staalwals installaties
- Test stands
- Generatoren
- Bulk handling
- Centrifuges
- Aandrijving voor koeltorens
- Compressoren
- Printmachines
Datasheets
Manuals
Tabel
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
| LP2 Series | |
| Rated torque (Nm) | TKN |
| Maximum torque (Nm) | TKmax |
| Overall length | A |
| Outside diameter (mm) | ø AD |
| Outside diameter of hub (mm) | ø B |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
Inside diameter range H7 (XL-Hub) (mm) | D1/2 |
| Fastening screw (ISO 4017) Nut (DIN 4032) | E |
| Tightening torque of the fastening screw (Nm) | |
| Distance (mm) | G |
| Overall length (mm) | G1 |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (10³ Nm/rad) | CT |
| Axial ± (mm) | |
| Lateral ± (mm) | |
| Angular ± (degree) | max. |
| Speed max. (rpm) | |
| maximum speed (balanced) (1/min.) | |
| Material | |
| CAD Portal |
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
