ST4
heavy duty veiligheidskoppelingen
Specificaties
Design:
- 2 naven:
- Tandoverbrenging:
- Veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
- Veiligheidselementen:
- Overbrenging:
- Oppervlak:
Optioneel:
⠀
Met spiebaan
Integraal
Gelijkmatig verdeeld
-30° C - 120° C
0.02 - 0.07 mm
Geen service
⠀
Versterkt nitro-gecarboneerd staal
Hoogwaardig staal
Nitro-gecarboneerd
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Omschrijving
De ST4 heavy duty veiligheidskoppeling van R+W Couplings heeft een integrale tandboogkoppeling en wordt toegepast voor directe aandrijving met overbelasting van koppel, waarbij zowel laterale, axiale als angulaire uitlijnfouten worden opgevangen. De ST4 koppeling heeft een robuust, compact en eenvoudig design, en een zeer nauwkeurige beveiliging op overbelasting. De industrie koppeling is torsiestijf en heeft integraal een heavy duty lager voor ondersteuning. Het maximaal koppel is bij de industrie koppeling is tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Neem voor specifieke vragen over veiligheidskoppelingen of andere industrie koppelingen contact op met VARIODRIVE.
Specificaties
Design:
- 2 naven:
- Tandoverbrenging:
- Veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
- Veiligheidselementen:
- Overbrenging:
- Oppervlak:
Optioneel:
⠀
Met spiebaan
Integraal
Gelijkmatig verdeeld
-30° C - 120° C
0.02 - 0.07 mm
Geen service
⠀
Versterkt nitro-gecarboneerd staal
Hoogwaardig staal
Nitro-gecarboneerd
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Specificaties
Design:
- 2 naven: Met spiebaan
- Tandoverbrenging: Integraal
- Veiligheidselementen: Gelijkmatig verdeeld
Temperatuurbereik: -30° C - 120° C
Tolerantie: 0.02 - 0.07 mm
Service-life: Geen service
Materiaal:
- Veiligheidselementen: Versterkt nitro-gecarboneerd staal
- Overbrenging: Hoogwaardig staal
- Oppervlak: Nitro-gecarboneerd
Optioneel: Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Toepassingen
- Hout verwerkingsmachines
- Bulk handling
- Tunnel boorsystemen
- Industriële Shredders
- Test bank
- Extruder
- Compressoren
- Afvalwaterzuivering
Tabel
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
| ST4 Series | |
| Overall length | A1 |
| Fit length / keyway length (mm) | C1/2 |
| Bore diameter Ø bis Ø F7 (mm) | D1/2 |
| Bolt circle diameter ST (mm) | O |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub diameter (gear coupling) (mm) | B4 |
| Speed max. (rpm) | |
| Length (mm) | E2 |
| Flange outside diameter (gear coupling) (mm) | B3 |
| Flange outside diameter (ST portion) (mm) | B1 |
| Axial (mm) | |
| Angular (degree) | |
| Tightening torque of the fastening screws (mm) | F |
| Adjustment range available from - to (KNm) | |
| Actuation distance (mm) | N |
| Mounting flange outside diameter (ST portion) (mm) | B2 |
| Screw (mm) | F |
| CAD Portal |
Bekijk video
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
