ST1
Heavy duty veiligheidskoppelingen
Specificaties
Design:
- Drijvende zijde:
- Gedreven zijde:
⠀
- De veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
Optioneel:
⠀
Spiebaan
Montageflens met 12x schroefdraad en integraal lagers
Gelijkmatig verdeeld
-30° C - 120° C
0.02 - 0.07 mm
Geen service
Gehard staal
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Omschrijving
De ST1 heavy duty veiligheidskoppeling van R+W Couplings wordt toegepast voor indirecte aandrijving met flens. De ST1 industrie koppeling heeft een robuust, compact en eenvoudig design. Hij kenmerkt zich door een zeer nauwkeurige beveiliging op overbelasting. De veiligheidskoppeling is torsiestijf en heeft integraal een lager voor ondersteuning. Het maximaal koppel is bij de industrie koppeling is tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Neem voor specifieke vragen over veiligheidskoppeling of andere industrie koppelingen contact op met VARIODRIVE.
Specificaties
Design:
- Drijvende zijde:
- Gedreven zijde:
- De veiligheidselementen:
Temperatuurbereik:
Tolerantie:
Service-life:
Materiaal:
Optioneel:
⠀
Spiebaan
Montageflens met 12x schroefdraad en integraal lagers
Gelijkmatig verdeeld
-30° C - 120° C
0.02 - 0.07 mm
Geen service
Gehard staal
Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Specificaties
Design:
- Drijvende zijde: Spiebaan
- Gedreven zijde: Montageflens met 12x schroefdraad en integraal lagers⠀
- De veiligheidselementen: Gelijkmatig verdeeld
Temperatuurbereik: -30° C - 120° C
Tolerantie: 0.02 - 0.07 mm
Service-life: Geen service
Materiaal: Gehard staal
Optioneel: Klant specifiek ontwerp, ATEX, stelsleutel of stelplaat
Toepassingen
- Hout verwerkingsmachines
- Bulk handling
- Tunnel boorsystemen
- Industriële Shredders
- Test bank
- Extruder
- Compressoren
- Afvalwaterzuivering
- Iedere toepassing waar overbelasting van koppel voorkomt
Tabel
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
| ST1 Series | |
| Overall length | A1 |
| Fit length (mm) | C |
Inside diameter range F7 (mm) | D |
| Fastening threads | H |
| Bolt circle diameter ± 0.3 (mm) | F |
| Bolt circle diameter ST (mm) | O |
| Outside diameter h7 (mm) | G |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3 kgm2) | |
| Moment of inertia (approx.) D max. + max. sgmnt (10-3kgm2) | |
| Distance (mm) | L |
| Distance (mm) | M |
| Hub outside diameter (mm) | P |
| Mounting length (mm) | J |
| Speed max. (rpm) | |
| Bore depth (mm) | A2 |
| Flange outside diameter (mm) | B |
| Wall thickness (mm) | K |
| Thread depth (mm) | I |
| Adjustment range available from - to (KNm) | |
| Pilot diameter h7 (mm) | E |
| Actuation distance (mm) | N |
| Bore for fastening screw (mm) | Q |
| Allowable max. radial force standard* (KN) | |
| CAD Portal |
Bekijk video
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
