SLE
Veiligheidskoppelingen
Specificaties
Design:
⠀
Systemen:
Temperatuurbereik:
Service-life:
Tolerantie:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel. Keuze uit elastomeersterren A of B.
Single position (standard), multi position
-30 tot +100 °C
Geen service
0.01 - 0.05 mm
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De dynamische SLE veiligheidskoppeling van R+W Couplings is compact, extreem lichtgewicht, corrosiebestendig, lage massatraagheid, gemakkelijk te (de)monteren en heeft een eenvoudig design. Door de frictie klemverbinding is absoluut spelingsvrij. De SLE veiligheidskoppeling is te combineren met twee verschillende typen R+W elastomeersterren, typen A en B. Beide typen R+W elastomeersterren dempen de trillingen en zijn elektrisch isolerend. Het maximaal koppel is bij de SLE koppeling is tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
Temperatuurbereik:
Service-life:
Tolerantie:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel. Keuze uit elastomeersterren A of B.
Single position (standard), multi position
-30 tot +100 °C
Geen service
0.01 - 0.05 mm
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: Klemnaaf met radiale schroef ISO 4762 en integraal lager voor een tandriempoelie of tandwiel. Keuze uit elastomeersterren A of B.
Systemen: Single position (standard), multi position
Temperatuurbereik: -30 tot +100 °C
Service-life: Geen service
Tolerantie: 0.01 - 0.05 mm
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SLE Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Inside diameter (Elastomer insert) (mm) | DE |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| ISO 4762 screw, coupling side / torque limiter side | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance to clamping screw, coupling side / torque limiter side | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Length of hub (torque limiting portion) | C2 |
| Maximum torque* (Nm) | TKmax |
| Adjustment nut's clamp screw ISO 4762 | R |
| Static torsional stiffness (Nm/rad) | |
| Dynamic torsional stiffness (Nm/rad) | |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping hub Ø, safety coupling | O2 |
| Clamping hub Ø, elastomer coupling | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| SLE Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Inside diameter (Elastomer insert) (mm) | DE |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| ISO 4762 screw, coupling side / torque limiter side | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance to clamping screw, coupling side / torque limiter side | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Length of hub (torque limiting portion) | C2 |
| Maximum torque* (Nm) | TKmax |
| Adjustment nut's clamp screw ISO 4762 | R |
| Static torsional stiffness (Nm/rad) | |
| Dynamic torsional stiffness (Nm/rad) | |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping hub Ø, safety coupling | O2 |
| Clamping hub Ø, elastomer coupling | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
| SLE Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Inside diameter (Elastomer insert) (mm) | DE |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| ISO 4762 screw, coupling side / torque limiter side | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance to clamping screw, coupling side / torque limiter side | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Length of hub (torque limiting portion) | C2 |
| Maximum torque* (Nm) | TKmax |
| Adjustment nut's clamp screw ISO 4762 | R |
| Static torsional stiffness (Nm/rad) | |
| Dynamic torsional stiffness (Nm/rad) | |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping hub Ø, safety coupling | O2 |
| Clamping hub Ø, elastomer coupling | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
| SLE Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Inside diameter (Elastomer insert) (mm) | DE |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| ISO 4762 screw, coupling side / torque limiter side | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance to clamping screw, coupling side / torque limiter side | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Length of hub (torque limiting portion) | C2 |
| Maximum torque* (Nm) | TKmax |
| Adjustment nut's clamp screw ISO 4762 | R |
| Static torsional stiffness (Nm/rad) | |
| Dynamic torsional stiffness (Nm/rad) | |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping hub Ø, safety coupling | O2 |
| Clamping hub Ø, elastomer coupling | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
