SL2
Veiligheidskoppelingen
Specificaties
Design:
Systemen:
Temperatuurbereik:
Service-life:
Tolerantie:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en balgdeel
Single position (standard), multi position
-30 tot +100 °C
Geen service
0.01 - 0.05 mm
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De dynamische SL2 veiligheidskoppeling van R+W Couplings is compact, lichtgewicht, corrosiebestendig, lage massatraagheid, gemakkelijk te (de)monteren en heeft een eenvoudig design.. Door de frictie klemverbinding is deze precisie koppeling torsie stijf en absoluut spelingsvrij. Dankzij de geforceerd gevormde balg kan het element tegelijkertijd zowel laterale, axiale en angulaire uitlijnfouten opvangen. Het maximaal koppel is bij de SL2 veiligheidskoppeling tevens handmatig te verstellen met een stelsteutel. Deze sleutel is apart te bestellen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
Temperatuurbereik:
Service-life:
Tolerantie:
Optioneel:
Klemnaaf met radiale schroef ISO 4762 en balgdeel
Single position (standard), multi position
-30 tot +100 °C
Geen service
0.01 - 0.05 mm
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: Klemnaaf met radiale schroef ISO 4762 en balgdeel
Systemen: Single position (standard), multi position
Temperatuurbereik: -30 tot +100 °C
Service-life: Geen service
Tolerantie: 0.01 - 0.05 mm
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SL2 Series | |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (Nm/rad) | CT |
| Screw ISO 4762 | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance between centers, bellows side/safety element (mm) | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Hub length (mm) | C1/C2 |
| Adjustment nut's clamp screw ISO 4762 | R |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping ring Ø, (torque limiter end) (mm) | O2 |
| Ø Clamping hub Ø, (coupling end) (mm) | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| SL2 Series | |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (Nm/rad) | CT |
| Screw ISO 4762 | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance between centers, bellows side/safety element (mm) | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Hub length (mm) | C1/C2 |
| Adjustment nut's clamp screw ISO 4762 | R |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping ring Ø, (torque limiter end) (mm) | O2 |
| Ø Clamping hub Ø, (coupling end) (mm) | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
| SL2 Series | |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (Nm/rad) | CT |
| Screw ISO 4762 | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance between centers, bellows side/safety element (mm) | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Hub length (mm) | C1/C2 |
| Adjustment nut's clamp screw ISO 4762 | R |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping ring Ø, (torque limiter end) (mm) | O2 |
| Ø Clamping hub Ø, (coupling end) (mm) | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
| SL2 Series | |
| Overall length | A |
| Inside diameter range H7 (XL-Hub) (mm) | D1/D2 |
| Approx. moment of inertia at D max (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Torsional stiffness (Nm/rad) | CT |
| Screw ISO 4762 | I1 / I2 |
| Tightening torque of the fastening screw (Nm) | R |
| Tightening torque of the fastening screw (Nm) | I1/I2 |
| Distance between centers, bellows side/safety element (mm) | P1/P2 |
| Distance (mm) | M1/M2 |
| Distance to actuation ring edge (mm) | L |
| Hub length (mm) | C1/C2 |
| Adjustment nut's clamp screw ISO 4762 | R |
| Adjustment range* available from - to (Nm) | TKN |
| Actuation ring diameter (mm) | B |
| Ø Adjustment nut (mm) | O1 |
| Clamping ring Ø, (torque limiter end) (mm) | O2 |
| Ø Clamping hub Ø, (coupling end) (mm) | O |
| Actuation distance (mm) | N |
| Lateral ± max. (mm) | |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
