SKP
Veiligheidskoppelingen
Specificaties
Design:
⠀
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
Optioneel:
Uitgevoerd met spiebaan verbinding en integraal lager voor een tandriempoelie of tandwiel
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 120 °C
Geen service
0.01 - 0.05 mm
Hoogwaardig gehard staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De SKP veiligheidskoppeling van R+W Couplings heeft een compact en eenvoudig design. Daarnaast bezit deze koppeling een snelle en accurate ontkoppeldetectie en ontkoppeling. Door de frictie klemverbinding is deze precisie koppeling absoluut spelingsvrij. De integraal lager maakt het eenvoudig om een tandriempoelie of tandwiel te monteren. Het maximaal koppel is bij de SKP veiligheidskoppeling tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Dankzij de geforceerd gevormde balgvorm kan het element tegelijkertijd zowel laterale, axiale en angulaire uitlijnfouten opvangen. Deze sleutel is apart te bestellen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Service-life:
Tolerantie:
Materiaal:
Optioneel:
Uitgevoerd met spiebaan verbinding en integraal lager voor een tandriempoelie of tandwiel
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 120 °C
Geen service
0.01 - 0.05 mm
Hoogwaardig gehard staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: Uitgevoerd met spiebaan verbinding en integraal lager voor een tandriempoelie of tandwiel
Systemen: Single position (standard), multi position, load holding, full disengagement
Reactietijd ontkoppelen: 1 – 3 msec
Temperatuurbereik: -30 tot 120 °C
Service-life: Geen service
Tolerantie: 0.01 - 0.05 mm
Materiaal: Hoogwaardig gehard staal
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
| SKP Series | |
| Overall length | A |
| Overall length +0.5 ("F" Version) (mm) | AF |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter (mm) | O |
| Diameter h7 (mm) | O1 |
| Actuation distance (mm) | |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
