SK1
Veiligheidskoppelingen
Specificaties
Design:
⠀
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Tolerantie:
Materiaal:
Optioneel:
Integraal lager, ≤ 10 Nm 2 klemnaven. Van 15 t/m 2.800 Nm conische naven.
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 120 °C
0.01 - 0.05 mm
Hoogwaardig staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Omschrijving
De SK1 veiligheidskoppeling van R+W Couplings heeft een eenvoudig en compact design. Dit design zorgt voor een snelle en accurate ontkoppeldetectie en ontkoppeling. In ontkoppelde toestand heeft deze precisie koppeling een zeer lage wrijving. Door de frictie klemverbinding is deze veiligheidskoppeling absoluut spelingsvrij. De integraal lager maakt het eenvoudig om een tandriempoelie of tandwiel te monteren. Het maximaal koppel is bij de SK1 koppeling tevens handmatig te verstellen met een stelsleutel. Deze sleutel is apart te bestellen. Voor specifieke vragen over veiligheidskoppeling of andere precisie koppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
⠀
Systemen:
⠀
Reactietijd ontkoppelen:
Temperatuurbereik:
Tolerantie:
Materiaal:
Optioneel:
Integraal lager, ≤ 10 Nm 2 klemnaven. Van 15 t/m 2.800 Nm conische naven.
Single position (standard), multi position, load holding, full disengagement
1 – 3 msec
-30 tot 120 °C
0.01 - 0.05 mm
Hoogwaardig staal
Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Specificaties
Design: Integraal lager, ≤ 10 Nm 2 klemnaven. Van 15 t/m 2.800 Nm conische naven.
Systemen: Single position (standard), multi position, load holding, full disengagement
Reactietijd ontkoppelen: 1 – 3 msec
Temperatuurbereik: -30 tot 120 °C
Tolerantie: 0.01 - 0.05 mm
Materiaal: Hoogwaardig staal
Optioneel: Klant specifiek ontwerp, RVS, ATEX, limit switch, stelsleutel
Toepassingen
- Machine gereedschap
- Verpakkingsmachines
- Machines voor metaalbewerking
- Test stands
- Pomp aandrijvingen
- Assemblage systemen
Tabel
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
| SK1 Series | |
| Overall length | A |
| Overall length ("F" Version) (mm) | AF |
| Fit length (mm) | C |
Inside diameter range H7 (mm) | D |
| Bolt circle diameter ± 0.2 (mm) | F |
| Moment of inertia (10-3 kgm2) | Jges. |
| Approximate weight (kg) | |
| Screw ISO 4762 | N |
| Tightening torque of the fastening screw (Nm) | N |
| Distance between centerlines (mm) | P |
| Distance (mm) | K |
| Distance (mm) | L |
| Distance (mm) | M |
| Distance (mm) | R |
| Distance, ("F" Version) (mm) | LF |
| Outside diameter clamp ring Ø (mm) | O |
| Flange outside diameter -0.2 (mm) | G |
| Thread | H |
| Thread depth (mm) | I |
| Adjustment range available from - to (approx. values) (Nm) | TKN |
| Adjustment range available from - to (approx. values) ("F" Version) (Nm) | TKN |
| Actuation ring Ø (mm) | B |
| Actuation ring Ø, ("F" Version) (mm) | BF |
| Pilot diameter h7 (mm) | E |
| Centering length -0.2 (mm) | J |
| Diameter h7 (mm) | O2 |
| Actuation distance (mm) | |
| CAD Portal |
Bekijk video's
gerelateerde producten
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
