EK6
Klauwkoppelingen
Specificaties
Design:
⠀
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:
⠀
- Elastomeester:
⠀
Snelheid:
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen.
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.
Omschrijving
Het type EK6 klauwkoppeling van R+W Couplings met klemring centreert zelf op de as. Door het press fit design en de hoge klemkracht is deze precisie koppeling volledig spelingsvrij. De EK6 klauwkoppeling is te combineren met verschillende typen R+W elastomeersterren. Alle typen R+W elastomeersterren dempen de trillingen en zijn elektrisch isolerend, waarbij de ATEX versie juist geleidend is. Voor specifieke vragen over klauwkoppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:⠀
- Elastomeester:⠀
Snelheid:⠀
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen.
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.
Specificaties
Design: 2 steekdelen concentrisch bewerkt met gebogen klauwen.
Temperatuurbereik: Verschilt per type elastomeerster
Tolerantie: 0.01 - 0.05 mm
Materiaal:
- Steekdeel: ≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
- Elastomeester: precisie gietwerk, slijtvast, en thermisch stabiel polymeer⠀
Snelheid: Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Optioneel: Klant specifiek ontwerp, RVS en Atex.
Toepassingen
- Machinebouw
- Servo-drive technologie
- Medische technologie
- Renewable energy
- Mijnbouw technologie
- Pompen en compressoren
- Transportsystemen
Tabel
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK6 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter range H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B/B1 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | F |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Maximum torque (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
Bekijk video's
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
