EK2
Klauwkoppelingen
Specificaties
Design:
⠀
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:
⠀
- Elastomeester:
⠀
Snelheid:
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen.
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balance grade op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.
Omschrijving
De R+W klauwkoppeling van het type EK2 is eenvoudig te (de)monteren. De concentrisch bewerkte klemnaven geven de koppeling een zeer mooie rondloop. Door het press fit design is deze precisie koppeling spelingvrij. De EK2 koppeling is te combineren met verschillende typen R+W elastomeersterren. Alle typen R+W elastomeersterren dempen de trillingen en zijn elektrisch isolerend, waarbij de ATEX versie juist geleidend is. Voor specifieke vragen over klauwkoppelingen neem dan contact op met VARIODRIVE.
Specificaties
Design:
Temperatuurbereik:
Tolerantie:
Materiaal:
- Steekdeel:⠀
- Elastomeester:⠀
Snelheid:⠀
Optioneel:
2 steekdelen concentrisch bewerkt met gebogen klauwen.
Verschilt per type elastomeerster
0.01 - 0.05 mm
⠀
≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
precisie gietwerk, slijtvast, en thermisch stabiel polymeer
Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Klant specifiek ontwerp, RVS en Atex.
Specificaties
Design: 2 steekdelen concentrisch bewerkt met gebogen klauwen.
Temperatuurbereik: Verschilt per type elastomeerster
Tolerantie: 0.01 - 0.05 mm
Materiaal:
- Steekdeel: ≤ series 450 in hoogwaardig aluminium, series 800 ≥ staal
- Elastomeester: precisie gietwerk, slijtvast, en thermisch stabiel polymeer⠀
Snelheid: Zie tabel. ISO 2.5 balanceer klasse op aanvraag leverbaar
Optioneel: Klant specifiek ontwerp, RVS en Atex.
Toepassingen
- Machinebouw
- Servo-drive technologie
- Medische technologie
- Renewable energy
- Mijnbouw technologie
- Pompen en compressoren
- Transportsystemen
Tabel
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
| EK2 Series | |
| Type (Elastomer insert) | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Outside diameter with screw head (mm) | BS |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Speed standard (min -1) | |
| Speed balanced (10³min-1) | |
| Hub length (mm) | H |
| Maximum torque* (Nm) | TKmax |
| Overall length (mm) | A |
| CAD Portal |
Bekijk video
Contact
Wil je met ons in contact komen?
Vul hiernaast het contactformulier in of ga naar de contactpagina
